A typical Art Nouveau cast iron fireplace insert.
It has a tulip design on the canopy, ornate detail around the fireplace opening and tiles sliders for tile-sets at either side of the fireplace opening.
Suitable sets of tiles can be chosen from our Fireplace Tile website at http://www.fireplace-tiles.com/.
This fireplace will need a hearth.
The hearth can be made to any size or shape, depending on the installation requirements.
Current gas and solid fuel regulations now stipulate that a 2 inch (50mm) raised hearth is required.
The Integra gas fire convector has a 4kW output with an impressive flame picture.
This is the available in a manual version
The Integra gas fire convector has a 4kW output with an imprerssive flame picture.
This is the remote control version
Integra Gas Slimline Multiflue
The Integra balanced flue gas fire convector has a 4.3 kW output with an efficiency of 94%
Does not need a chimney or flue
Integra Gas Fan Flue
Integra Gas HQ Radiant High Output
Integra Gas HQ Radiant High Output with a remote control
The solid fuel inset suitable for wood burning and smokeless fuels, boasts outputs up to 5kW and efficiency levels approaching 78%
There is a primary air-wash system located below the canopy of the casting which helps keep the window clean and a secondary air regulator which can be adjusted by moving the knob on the fire-front door to the left or right. The door simply clips open or closed with a special operating tool